BXBPS - LX500 GLOSS CLEAR, 7C20
- MSDS: BXBPS
- Manufacturer: DEXTER CROWN METRO AEROSPACE COATINGS
- Product Name: LX500 GLOSS CLEAR, 7C20
- National Stock Number: 8030-01-092-3879
Product Identification
Product ID:LX500 GLOSS CLEAR, 7C20
MSDS Date:10/21/1992
FSC:8030
NIIN:01-092-3879
MSDS Number: BXBPS
Responsible Party
HAYWARD, CA 94544
US
Emergency Phone: 510-471-7171
Info Phone: 510-471-7171
Preparer: MASTROIE
Cage: 0S4B8
Contractor
Telephone: 510-471-7171
Cage: 98795
Ingredients
2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 10-20%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM; 300 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
22 @ 20C
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <10%
OSHA PEL 200 PPM
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER; (1-METHOXY
CAS: 108-65-6
RTECS: AI8295000
Fraction By Weight: 40-50%
OSHA PEL N/K
ACGIH TLV: N/K
FORMALDEHYDE (SARA 302/313) (CERCLA)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 0.01767%
OSHA PEL N/K
ACGIH TLV: 0.3 PPM, C
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
BENZENE (SARA 313) (CERCLA)
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: 0.00070%
OSHA PEL N/K
ACGIH TLV: 10 PPM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
5 LBS/GAL LESS WATER
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: OVEREXPOSURE MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT, HEADACHE, DIZZINESS OR
DROWSINESS. SKIN/EYES: IRRITANT. CHRONIC: TOLUENE APPEARS ON THE
NAVY LISTING OF OCCUPATIONAL CHEM ICAL REPRODUCTIVE HAZARDS. SEEK
CONSULTATION FROM APPROPRIATE HEALTH PROFESSIONALS CONCERNING
LATEST (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: HAZARD LIST INFORMATION & SAFE
HANDLING & EXPOSURE INFORMATION . HAZARDOUS MATERIALS LISTED MAY
AFFECT THE FOLLOWING ORGANS: RESPIRATORY TRACT, CENTRAL NERVOUS
SYSTEM, KIDNEYS, LIVER R EPRODUCTIVE SYSTEM, CARDIAC SENSITIZATION.
Medical Cond Aggravated by Exposure:UNKNOWN AT THIS TIME.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. SKIN:
REMOVE CONTAMINATED CLOTHING & WASH SKIN WITH SOAP & WATER. INGEST:
DRINK WATER. IF NECESSARY, CONSULT MD FOR ANY OF THESE CONDITIONS.
Fire Fighting
Flash Point Method:SCC
Flash Point:22.0F,-5.6C
Lower Limits:1.20%
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA AND REMOVE WITH INERT ABSORBENT &
NON-SPARKING TOOLS. BEFORE ATTEMPTING TO CLEAN UP, SEE HAZARDOUS
INGREDIENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT TAKE INTERNALLY. CNTNRS SHOULD
BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF
FEW INCHES. KEEP CNTNR CLSD WHEN NOT IN USE.
Other Precautions:MAKE SURE DRUM IS COMPLETELY EMPTY BEFORE ATTEMPTING
TO WELD OR BRAZE. THE DRUM SHOULD BE INDUSTRIALLY CLEANED PRIOR TO
REUSE. DO NOT FLAME CUT, BRAZE OR WELD WITHOUT A NIOSH/MSHA
APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
Exposure Controls
Respiratory Protection:WHERE GEN DILUTION OR LOC EXHST FAILS TO ADEQ
DILUTE TWA/PEL OF MATL, THEN RESP PROT SHOULD BE USED AS FOLLOWS:
I/A/W 29CFR 1910.134, USE NIOSH/MSHA APPRVD AIR LINE TYP RESPS OR
HOODS FOR ENCLSD & CO NFINED AREAS. NIOSH/MSHA APPRVD (SUPDAT)
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENT TO KEEP TWA
& LEL BELOW ACCEPTABLE LIMITS & TO REMOVE DECOMP PRODS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT: AIR PURIFYING RESPS MAY BE USED FOR OTHER AREAS.
Chemical Properties
Boiling Pt:B.P. Text:>172F,>78C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.00
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRDCE HAZ FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.